They are compact and do not require any external control unit . Transparent Light-transmitting screen is made of reinforced polycarbonate with protection against UV radiation. The base made of aluminum alloy provides the normal operating temperature of LEDs which guarantees high luminous efficiency and long life . The light sources are only used LEDs produced by CREE or Samsung. There is no any interference to aviation band ( 118-136 MHz ) radio receivers in progress.
There are two options for connecting lights: with using synchronizing wire or without one.
The option without synchronization is designed for easy installation in aircrafts with custom two-wire circuit. As each light has its own driver using a microcontroller with a crystal controlled oscillator it provides
- simultaneous start of both right and left lights
- almost imperseptible to the eyes difference between the beginnings of the right and the left light strobe flashes after continuous operation.
In tree-wire mode with 3rd synchronization wire the beginnings of both flashes are constantly synchronized.
LED БАНО + килевой стробоскоп, запуск без подключения синхронизации
Килевой стробоскоп
LED БАНО спустя час работы без синхронизации
Technical and Performance data (for 1 light)
Wingtip lights 12V/28V
Tail light 12V/28V
Beacon light 12V/28V
Voltage range, V
9-16/24-32
9-16/24-32
9-16/24-32
Current, Position lights, A
0,3/0,14
0,09/0,04
-/-
Strobe light Power (not less), W
45/45
30/30
45/45
Position ligts Luminous, Сd
Green, red
White
50/50
30/30
-/-
30/30
-/-
-/-
Anti-collision strobe Luminous, Cd
500/500
500/500
500/500
Flash duration, ms
2х80/2Х80
2х80/2х80
2х80/2х80
Flash frequency (twinned), fl/min
49/49
49/49
49/49
Dimentions (LxWxH), mm
116,5х40х36/
116,5х40х36
52,5х44,5х55/
52,5х44,5х55
52,5х44,5х59/
52,4х44,5х59
Weight, g
94/94
60/60
70/70
Guaratee and Price
We provide 1 year guarantee period.
The price for the PROXEN LED Position /Anti-collision strobes lights: 250 euros Phones : +7(495)2201920; +7(916)9251834
Email : westcar@cea.ru
Installation
To connect the lights we recommend using the power cable of at least 0.75 mm2 at 12v supply voltage and not less than 0.5 mm2 at 27v. The cross section of the sync wire is not standardized.